Opera on Systems
Vitality™ Series | SL
‐
Accent™ Control
44
Reminder
General
maintenance
helps.
Reminder Messages can be suppressed by using the Preferences Menu (recommend service techs access only). Press a temp
bu on to reset a displayed reminder message.
Clean
the
fi
lter
May appear on a regular schedule, i.e. every 30 days. Clean the
fi
lter cartridge as instructed in the owner’s manual.
Test
the
GFCI
(or RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reliability. Every user should be
trained to safely test the GFCI or RCD associated with the hot tub installa on. A GFCI or RCD (European) will have a TEST and RESET
bu on on it that allows a user to verify proper func on.
WARNING:
If
freezing
condi ons
exist,
a
GFCI
or
RCD
should
be
reset
immediately
or
spa
damage
could
result.
The
end
user
should
always
be
trained
to
test
and
reset
the
GFCI
or
RCD
on
a
regular
basis.
Change
the
water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis to maintain proper chemical
balance and sanitary condi ons.
Change
the
Filter
May appear on a regular schedule, i.e. every 30 days. Filters should be replaced regularly to maintain proper spa func on and
sanitary condi ons.
Check
Ozone
May appear on a regular schedule, i.e. every 365 days. Check your ozone/UV generator to assure properly sani zed water.
Service
Check
May appear on a regular schedule, i.e. every 365 days. Have a service tech do a check
‐
up on your spa.
