2.4 Printing positions for 2XL and 2XCR100 versions
There are three selectable positions of the 85.6 x 53.98 mm printing
area on the XXL cards and two positions on the CR100 cards.
You can select the printing position by pressing the button inside the
printer near the card inlet next to an LED with the crystal rod as shown.
First hold the button until the LED blinks, then press shortly until the re-
quired colour appears and release the button immediately. The LED will
blink some more times and then stop. The position is now saved.
The colour of the LED displays the printing position as following:
2XL-Printers
Blue:
central position with 140 mm / 5,51 “ card length
Green:
central position with 124 mm / 4,88 “ card length
Red:
bottom or top position with both card lengths
2XCR100-Printers
Green:
central position
Red:
bottom or top position
possible printing positions on CR100 cards
11
Bottom
Position
Top
Position
Central
Position
Central
Position
at 140 mm
card lenght
Bottom
Position
at
124/140 mm
card lenght
Top Position
at
124/140 mm
card lenght
Central
Position
at 124 mm
card lenght
possible printing positions on XXL cards
Chapter 2. Start printing
