background image

 

 

 

 

 

 

B

 

On/Standby

 

Button: With the AC power cord connected and the rear panel POWER 

switch set to ON, this button toggles the unit between On mode (which selects the last 

input used) and Standby mode which lights the LED red.

 

 

C

 

USB-B Button: This button selects the USB-B input and lights the LED blue (or green if 

the  volume  bypass  mode  is  engaged  -  please  see  the  volume  control  bypass 

instructions  elsewhere  for  more  detail).  Caution:  the  volume  control  in  the  nova  is 

completely bypassed when using the volume control bypass mode!

 

 

D

 

USB-A Button: This button selects the USB-A input and lights the LED blue (or green if 

the  volume  bypass  mode  is  engaged  -  please  see  the  volume  control  bypass 

instructions  elsewhere  for  more  detail).  Caution:  the  volume  control  in  the  nova  is 

completely bypassed when using the volume control bypass mode! 

 

E

 

COAX Button: This button selects the COAX input and lights the LED blue (or green if 

the  volume  bypass  mode  is  engaged  -  please  see  the  volume  control  bypass 

instructions  elsewhere  for  more  detail).  Caution:  the  volume  control  in  the  nova  is 

completely bypassed when using the volume control bypass mode!

 

 

F

 

OPT-1 & OPT-2 Button: These buttons select the OPT-1 and OPT-2 inputs and light 

the LED blue (or green if the volume bypass mode is engaged - please see the volume 

control bypass instructions elsewhere for more  detail). Caution: the volume control in 

the nova is completely bypassed when using the volume control bypass mode! 

 

G

 

AUX-1/HTB  Button:  This button selects the AUX-1 input and lights the LED blue (or 

green if the Home Theater Bypass mode is engaged - please see the Home Theater 

Bypass instructions elsewhere for more detail). Caution: the volume control in the nova 

is completely bypassed in the Home Theater Bypass mode!

 

 

H

 

IR Receiver: Window for receiving Infra-Red (IR) commands from the included remote 

control or third-party remote control systems. Note: The nova also includes an IR input 

on  the  rear  panel  for  receiving  wired  IR  commands  from  third-party  remote  control 

systems.

 

 

I

 

AUX-2/PHONO Button: This button selects the AUX-2 input and lights the LED blue (or 

green  if  the  PHONO  input  mode  is  engaged).  PHONO  input  mode  is  designed  to 

integrate the nova with a Moving Magnet  (MM) phonograph/turntable. Note: When in 

PHONO input mode, the input has additional gain and equalization settings applied that 

2

3

4

5

6

8

9

10

11

1

7

FRONT PANEL 

LOOP

FRONT PANEL

B

  On/Standby Button: With the AC power cord connected and the rear panel 

POWER switch set to ON, this button toggles the unit between On mode (which 

selects the last input used) and Standby mode which lights the LED red.

C

  USB-B Button: This button selects the USB-B input and lights the LED blue (or 

green if the volume bypass mode is engaged - please see the volume control 

bypass instructions on page 17 for more details). Caution: the volume control in 

the nova is completely bypassed when using the volume control bypass mode!

D

  USB-A Button: This button selects the USB-A input and lights the LED blue (or 

green if the volume bypass mode is engaged - please see the volume control 

bypass instructions on page 17 for more details). Caution: the volume control in 

the nova is completely bypassed when using the volume control bypass mode!

E

  COAX Button: This button selects the COAX input and lights the LED blue (or 

green if the volume bypass mode is engaged - please see the volume control 

bypass instructions on page 17 for more details). Caution: the volume control in 

the nova is completely bypassed when using the volume control bypass mode!

F

  OPT-1 & OPT-2 Button: These buttons select the OPT-1 and OPT-2 inputs and 

light the LED blue (or green if the volume bypass mode is engaged - please see 

the volume control bypass instructions on page 17 for more details). Caution: the 

volume control in the nova is completely bypassed when using the volume control 

bypass mode!

G

  AUX-1/HTB Button: This button selects the AUX-1 input and lights the LED blue 

(or green if the Home Theater Bypass mode is engaged - please see the Home 

Theater Bypass instructions on page 16 for more details). Caution: the volume 

control in the nova is completely bypassed in the Home Theater Bypass mode!

H

  IR Receiver: Window for receiving Infra-Red (IR) commands from the included 

remote control or third-party remote control systems. Note: The nova also includes 

an IR input on the rear panel for receiving wired IR commands from third-party 

remote control systems.

I

  AUX-2/PHONO Button: This button selects the AUX-2 input and lights the LED 

blue (or green if the PHONO  input  mode  is  engaged).  PHONO input mode is 

designed to integrate the nova with a Moving Magnet (MM) phonograph/turntable. 

Note: When in PHONO input mode, the input has additional gain and equalization 

12

Summary of Contents for nova 150

























Reviews: