Chapter 4 Operation and Display
4.3 How to view status parameters
In stop or running status, LED nixie tube can be used to display the multiple
state parameters of AC drive. The function code F08.03( operating parameter1)
and F08.05( stop parameter) can be used to select whether this state parameter
shall be displayed.Please refer to the function code F08. 03~F08.05 for more
explanations. DATA is available for circular switchover to display the state para-
meter of halting state or running state.
In stop status, total 13 stop status parameters are available for selection to be
displayed or not, and respectively are: setting frequency, bus voltage, input ter-
minal status, output terminal status, PID setting, analog AI1 value, analog AI2
value, analog AI3 value, timing value, length value, PLC state, load speed, input
pulse frequency(kHz).Positionally select whether display function F08. 05, and
switch to display the selected parameters upon the sequence of FUNC/
DATA.
In running status, total 32 status parameters are available for selection to be dis-
played or not, and respectively are: setting frequency, running frequency, output
current, output voltage, running speed, output torque, output torque, bus voltage,
PID setting value, PID feedback value,
input terminal status, output terminal status, analog AI1 value, analog AI2 value,
analog AI3 value, timing value,length vaule. Positionally select whether display
function F08. 03/F08.04, and switch to display the selected parameters upon the
sequence of FUNC/ DATA.
If AC drive was power cut and then power on again, parameters is display the
selected parameter before power cut.
4.4 Password setting
AC drives provide user password defensive function.When F08. 00 is set to non-0,
it is user password. While quit function code editing state, password protection will
take effect. Press PRGM/ESC again to enter function code editing state, it
will
display“0. 0. 0. 0. 0.”.User must enter password correctly,or he
cannot get access.
If cancel password protection function, set F08.00 to 0.
-40-
C
h
a
p
te
r
4
Peaco Support FC280 Series VFD User Manual
www.peacosupport.com sales@peacosupport.com Free Shipping Worldwide Reliable Supplier
PEACO SUPPORT
