6.6.2. Running the Timed Program
Action
LCD Display
Description
1.
Press
Recall _
This will use the Recall Program
Feature.
2.
Press
StEP
-.-00
Recall 0
This will enter into Recall Timed
Program Mode.
3.
4.
Press
UP or
DN
Press
Press to check the settings of the
steps(timed subprograms)
Press Enter to confirm
5.
6.
to
Press
CyC –
000
Recall o
Use the number key (1-9) to input the
number of running cycles
You can key in 1-256 cycles.
0000 means the timed program will run
infinite cycles.
Press this key to activate the timed
program.
Note: whenever to terminate the Timed Program, press "CLEAR" to return to the normal
operation.
6.6.3. Preset Programming
Action
LCD-Display
Description
1.
Press
Program _
This will use the Programming Feature.
2.
to
Program 4
Use the number key (1-9) to select the
program number and it will enter into the
Preset Programming Mode.
In this example, Preset Program
Number 4 is selected.
3.
to
V-Set
Use the number key to input your
desired voltage.
4.
Press
Press Enter to confirm the voltage
setting.
5.
to
I-Set
Use the number key to input your
desired current.
6.
Press
Press this key to confirm the current
setting.
The program will then advance to the
next Preset. In this example, it will
advance
Program 5
7.
Repeat Procedures
3 to 6
You can repeat procedure 3 to 6 to
change the setting of next preset,
otherwise just press enter until
Program_ icon disappears.
-38-
RECALL
0
ENTER
9
1
ENTER
PROG.
1
9
0
9
ENTER
0
9
ENTER
