Command Code & Return Data
Description
Input Command:
GPAL <address> [CR]
Return Data from Power Supply:
Reading voltage [####] V [ON]
Reading current [####] A [ON]
Reading watt [####] W [ON]
Timer minute [####] second [##] timer [ON] colon [ON] m [ON] s [ON]
Setting voltage [###] V-const [ON] V-bar [ON] V [ON]
Setting current [###] I-Const [ON] I-bar [ON] A [ON]
Program [#] Program [ON] P-bar [ON]
SETTING [ON] Key lock [ON] Key open [ON] FAULT [ON] Output on
[ON]
Output off [ON] Remote [ON] [CR]
[OK] [CR]
Get LCD Display
Information
Input Command:
VOLT <address> voltage {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Set Voltage Level
XXX-Max. Output Rating
Voltage = XX
.
X V
Current = X
.
XX V
Input Command:
CURR <address> current {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Set Current Level
Input Command:
SOVP <address> voltage {000-XXX} <CR>
Return Data from Power Supply:
[OK] [CR]
Set upper Voltage Limit of PS
Input Command:
SOUT <address> 1 <CR>
Return Data from Power Supply:
[OK] [CR]
Disable Output of PS
Input Command:
SOUT <address> 0 <CR>
Return Data from Power Supply:
[OK] [CR]
Enable Output of PS
Input Command:
POWW <address> location {1-9}0 <CR>
Return Data from Power Supply:
[OK] [CR]
Enable the output when switch
on the power supply.
Input Command:
POWW <address> location {1-9}1 <CR>
Return Data from Power Supply:
[OK] [CR]
Disable the output when switch
on the power supply.
Input Command:
PROM <address> location {1-9} Voltage {000-XXX} Current {000-
XXX} <CR
>
Return Data from Power Supply:
[OK] [CR]
Set Voltage and Current
values of Preset
Memory
-52-
