3.2. Autoranging / manual range selection
When the meter is first turned on, it automatically goes into Auto-
Ranging. This automatically selects the best range for the
measurements being made and is generally the best mode for most
measurements. For measurement situations requiring that the range
be manually held, perform the following:
1. Press the "RANGE" button. The "AUTO" indicator will extinguish
and the currently selected range will be held.
2. Press the "RANGE" button to step through the available ranges
until you select the range you want.
3. Press and hold the "RANGE" button for 2 seconds to exit the
manual ranging mode and return to "AUTO" mode.
4. Features
4.1. Understanding the Push Buttons
RANGE:
The manual range is selected in the current measurement
function by pressing the RANGE button. When the
RANGE button is held for 2 seconds, the unit will return to
autoranging.
MODE:
Can switch in a range between different electrical functions
by pressing the MODE button. In current and voltage
range measurement it is switched between AC and DC.
When you select the
Ω / CAP / diode / continuity tester
range with the MODE key can be switched between these
measurement functions.
-49-
