2. Introduction
Our PeakTech 6080 A laboratory power supply is a linear-regulated power supply with safety
isolating transformer according to EN-61558. The (primary side) mains input voltage is galvanically
separated from the (secondary side) DC output voltage by this transformer, which has no relation to
the earth potential.
This model has a maximum output voltage of 15 V DC and outputs a so-called SELV safety extra-
low voltage.
The metal housing is earthed and complies with protection class I, whereby the output side voltage
corresponds to a protection class III environment due to the galvanic isolation.
This device is passively cooled and therefore has an external heat sink on the back of the device.
3. Technical Data
Operation voltage
104~127V AC (60Hz), 207~253V AC (50Hz)
Output voltage
0 - 15 V DC
Output current
0- 3 A DC
Line regulation
(0-100% Load)
CV≤0.01%+1mV
CC≤0.2%+1mA
Load regulation
(0-100% Load)
CC≤0.2%+1mA
CC≤0.2%+3mA
Ripple and noise
(0-100% Load)
CV≤0.5mVr.m.s
CC≤3mAr.m.s
Protection
constant current and short-circuit protection
Accuracy
Voltage indication
± 0,5% +5 digits
Current indication
± 0,5% +5 digits
Dimensions (Wx H x D)
80 x 160 x 225 mm
Weight
2 kg
Accessories
Power cable and manual
Operating Temperature
0 … 40°C
Operating Humidity
< 90% R.H.
- 6 -
