4.4 Programmable output
The programmable output function can preset up to 100 groups of timing parameters. When you turn on the programmable
output, the instrument outputs the preset voltage and current in the preset time duration.
4.4.1 Data view
Press the Program key. The
Data View
menu is selected
(1) The
Memory
submenu is active. Press
＜
/
＞
to
switch
between
Internal
and
External.
(2) Use the
▼ key to switch to the
Import
submenu. Press the
key to import data.
(3) Use the
▼ key to switch to the
Export
submenu. Press the
key to export data.
Note:
If external is selected as the storage location, a folder (
ODP\Program
) will be created on the connected USB
memory where the program will be saved as a CSV file for editing.
(4) Use the
▼ key and select the
Clear Data
submenu. Press the key to
clear the data.
4.4.2 Output settings
Press the Program key and turn the knob to switch to the
Output Set
menu.
(1) The
Cycle Mode
submenu is active. Press
＜
/
＞
to
switch
between
Order
(1x) and Loop.
(2) Use the
▼ key to switch to the
Start Point
submenu. Use the numeric keys to set the value of the start point of the
table to run through. Press the
key to confirm the entry.
(3) Use the
▼ key to switch to the
Stop Point
submenu. Use the numeric keys to set the value of the end point of the
table to pass. Press the
key to confirm the input.
(4) Use the
▼ key to switch to the
Start
submenu. Use the
＜
/
＞
keys to switch between CH1, CH2 or ALL. Press
the
key to confirm the entry.
-11-
