4.4.4 Switching the programmable output on and off
In the
Data Processing
menu:
Independent Mode (Normal)
Press the orange ON/OFF button to turn the programmable output of CH1 on and off.
Press the blue ON/OFF button to turn the programmable output of CH2 on and off.
Parallel/Series Mode
Press the orange ON/OFF key to switch the programmable output on and off.
In the
Output Set
menu:
Press the
▼ key to enter the
Start
item. Now press the
＜
/
＞
keys to select the channel (CH1, CH2 or All) and then press
the
key to activate the data processing menu and output the selected channel.
Notice:
When using the programmable output, pressing the ON/OFF key activates the timer.
of the output is reset. If you switch the output on again, the time program starts automatically
new from the beginning.
4.5 Save settings and Auto Record
4.5.1 Saving settings
You can save, recall and delete current setting parameters. The memory can be set as internal or external (USB flash
device). Up to 100 groups of settings can be stored.
Press the Record key. The
Save Settings
menu is displayed.
(1) The
Memory
submenu is active. Press
＜
/
＞
to
switch
between
Internal
and
External.
(2) Use the
▼ key to switch to the
Save
submenu. Press
＜
/
＞
to select the channel (CH1, CH2 or CH3) and then
press the
button to save the channel settings.
Note:
If external is selected as the storage location, a folder (
P6181\Record_Option
) is created on the connected
USB memory in which the channel setting is saved as a CSV file.
(3) Use the
▼ key and select the
Delete
submenu. Press the
key and a red box will be displayed around the
saved setting. Press the
▲ / ▼ keys to change the line or
＜
/
＞
to change the page. Select the desired value
and then press the
key to delete the record. Use the Backspace key
←
to
switch back a menu.
-13-
