55
ENGLISH
PRIVATE NETWORK CONNECTION
Select WPS connection type
If a network is protected by a WEP or WPA
encryption, the query for constructing a con-
nection over WPS (Wi-Fi Protected Setup)
appears. If the router of your wireless net-
work has a WPS function, select whether the
WPS connection should be established by
entering a PIN code over the WPS key on
the router.
WPS connection using PIN entry
A WPS-PIN appears in the Internet radio dis-
play. Enter this PIN and confirm the Internet
radio with
OK
. The WPS connection will then
be established.
Connection using WPS key
Press the WPS key on the router and then
confirm the display on Internet radio with
Select
. The WPS connection is then estab-
lished.
CONNECTION USING THE DIRECT EN-
TROY OF THE NETWORK KEY
If you do not want to establish any connec-
tion using the WPS, select the entry, No
WPS and then enter the network key in the
following dialogue. Confirm the entry with
Select
.
Key:
BKSP
OK
CANCEL
o p q r s t u v w x y z A B C
D E F G H I J K L M N O P Q R
1 2 3 4 5 6 7 8 9 . - @ ,
a b c d e f g h i j k l m n
0
COMPLETING THE WLAN CONNECTION
1. The connection begins. The device
should now establish a connection with
the WLAN. Once the connection has
been established, the notification <
Set-
up-Assistant is finished
> appears.
Confirm the display with
Select
.
2. If the WLAN cannot be accessed (e.g.
locked for new WLAN devices) the failure
notification “Connection not successful”
appears.
3. In this case, check the setting of your
WLAN-router.
Note
The entered password (WEP/WPA key) will
be saved and will not need to be entered
again.
After a successful set-up and connection,
the following display appears:
Internet radio
Last listened
Main menu
Station list
Allgemeine Einstellungen
PDR300_IM_I_01.indb 55
9/26/12 4:45 PM
