3
WARNINGS AND IMPORTANT NOTES
FROM THE SSD TEAM
Mimic Pro and all accessories need careful handling.
Make sure that Data Wheel (encoder knob) is protected while Mimic Pro is being
transported.
Do not apply undue pressure on the Data Wheel (encoder knob)
Make sure that the LCD screen is protected during transportation.
Make sure nothing abrasive contacts Mimic Pro’s LCD screen during transportation.
Do not twist or stretch power supply cable. Handle with care.
Do not connect Mimic Pro to an outlet that’s being used with an air conditioner, refrigerator,
welder, washing machine, microwave oven – anything that has a motor or inverter. This
may cause noise, improper function, or even hardware damage.
Try to avoid using the unit near strong electromagnetic emitting devices (big transformers,
satellite transmitters, etc) as well as high power wireless hardware.
Make sure to turn off the power before making any connections.
Never switch off Mimic Pro immediately after an operation is finished, such as copying to
or from a USB stick. Always wait at least 5-10 seconds.
Use only a dry soft cloth to clean Mimic Pro. Never use any chemicals to clean Mimic Pro.
You can use a protective film (like used on smart phones) to prolong the LCD screen life
and protect it from possible damage.
If there is a malfunction, all data on Mimic Pro’s internal storage (solid state drive) may be
lost, or damaged. Please backup your data.
Do not expose Mimic Pro to high vibration levels.
Do not bend and drop Mimic Pro.
Do not expose Mimic Pro to high humidity.
Do not use Mimic Pro in temperatures below 0° Celsius, 32° Fahrenheit.
Do not keep Mimic Pro and its accessories under direct sunlight.
Do not disassemble Mimic Pro and do not touch the contact points on connectors
(especially USB).
Keep Mimic Pro away from dust and liquids.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
