P550c Operation Manual
8 WinCan PC connections
240
8.1 Ethernet connection
– no router
Follow the steps detailed below to enable control of your P550c system directly from your WinCan VX-
enabled PC, without a router.
1 Connect an Ethernet cable between the Ethernet port on the flexitrax P550c controller and an
Ethernet socket on the PC, either directly, if the PC itself has an Ethernet port, or using an adapter
such as a “USB to Ethernet” converter.
Note
:
For most set-ups, any good quality Ethernet cable is suitable, but using a crossover Ethernet
cable can help solve some connection issues, particularly for older equipment.
2 From the P550c controller Start-up screen, select
Settings > Network > Ethernet settings
3 Set the
IP assignment
to
Manual
.
4 Set the
IP address
to 169.148.1.120
Note
:
You can choose an arbitrary IP address, but it must be of this format. If you select a different IP
address, ensure the next steps follow a similar layout.
5 Set the
Subnet mask
to 255.255.255.0
6 Set the
Default gateway
to 169.148.1.121
Summary of Contents for Flexitrax P550c
Page 103: ...P550c Operation Manual 5 System setup www pearpoint com 103 Fig 5 6 Settings menu...
Page 213: ...P550c Operation Manual 7 Surveys www pearpoint com 213 Fig 7 6 Gmail account home...
Page 215: ...P550c Operation Manual 7 Surveys www pearpoint com 215 Fig 7 9 Gmail Less secure app access...
Page 276: ...P550c Operation Manual 13 Open Source Software www pearpoint com 276...
