P356 Compact Cradle Deployment and Operation Guide
Step 1: Install P356 Crawler into P356 Compact Cradle
Place
P356 Crawler (3)
in
P356 Compact Cradle (1)
. Choose whether the
Deploy Bracket (5)
is to face
forwards or backwards, set by whether the camera is to point upwards or downwards during deployment.
Push
P356 Crawler
to the opposite side of
P356 Compact Cradle
from
Lobe screw (4)
and fully engage
drives on that side. Tighten
Lobe screw
until hand tight. The spring-loaded drive shafts of
P356 Compact
Cradle
engage automatically when P356 Compact Cradle Assembly is driven.
Step 2: Deploy P356 Compact Cradle Assembly
Using a rope through
Deploy Bracket
, lower the P356 Assembly into position using
P350 Cable (2)
to guide
the Assembly if required. When it is in position, remove the rope. Set the wheel size to 110mm in the P350
‘Setup Equipment’ menu and begin your survey.
Step 3: After the survey
Lift P356 Compact Cradle Assembly using a rope through
Deploy Bracket
. Again,
P350 Cable
may be used
to guide its position. Loosen
Lobe screw
to remove
P356 Crawler
from
P356 Compact Cradle
, if required.
Specifications
Notes
Dimensions (H x W x L)
320 x 419 x 617mm/12.6 x 16.5 x 24.3"
P356 Compact Cradle only
Weight
15kg / 33.1lb
Dimensions (H)
442mm / 17.4 "
Min height of Assembly, incl. P356 Crawler, Powered
Elevator (lowered), PTZ Camera and Lighthead
Weight
43kg / 94.8lb
Ordering information
Description
Sales Part Number
P356 Compact Cradle
10/P356-CRADLE-COMP
P356 Crawler and other parts available separately
Wheel for P356 Comp. Cradle 10/P356-CRADLE-WHEEL-COMP
Single spare wheel 9"/225mm
Copyright © 2018 Radiodetection Ltd. All rights reserved. Radiodetection is a subsidiary of SPX Corporation. Pearpoint, P350 and P356 are trademarks of
Radiodetection in the United States and/or other countries. Due to a policy of continued development, we reserve the right to alter or amend any published
specification without notice. This document may not be copied, reproduced, transmitted, modified or used, in whole or in part, without the prior written consent
of Radiodetection Ltd.
90/P356CRADLE-DEPLOY-EN/02
P350 Cable (2)
Can be used to guide
the P356 Compact Cradle
during deployment
Lobe screw (4)
To fix the P356 Crawler
in place in the Cradle
P356 Crawler (3)
With Powered Elevator,
PTZ camera, and
Lighthead
Deploy Bracket (5)
For rope, to deploy
the P356 Compact
Cradle assembly
P356 Compact Cradle (1)
Heavy object: care must be taken when lifting
