Pearson Easy Pen User Manual
© Pearson Education Asia Limited 2013
7
blinking patterns
10 Reset
Press with the tip of a pencil to reset Easy Pen hardware
11 Microphone
For recording
1.
Battery and power
Built-in Li-ION rechargeable battery.
No external batteries required.
Easy Pen cannot be operated while charging.
When the battery power is very low, the red Status Indicator will blink for
15 seconds and then switch off automatically with a continuous ‘beep’
sound.
The full charging time for Easy Pen is around 3 hours.
The playing time of the fully charged unit is about 2 hours at default
volume.
Easy Pen will automatically switch off after 10 minutes of inactivity. Before
that, you will hear ‘Goodbye’.
2.
Volume
Total 7 volume levels.
3.
Record
Recording capacity: 2 minutes
[Model: EP1]
; 5 minutes
[Model: EP2]
.
The recording will be stopped with a ‘beep’ sound when time is up.
Only one and the latest recording can be saved in the unit.
The red Status Indicator blinks once per second while recording.
4.
Play
Only one and the latest recording can be played.
Press On/Off Switch or Record button to stop the playback.
The red Status Indicator blinks 8 times per second while playing back the
recording.
