Peavey PVs 12 Sub, Operating Manual

tem, so it should require little, if any, additional EQ.  

A Bass Enhance button has been provided to increased the punch of the PVs 12 Sub, and this should definitely 

not have any additional bass boost used with it, it WILL cause premature compression and limiting, and greatly 

reduce the dynamics of the bass.

Reduce the amount of any external (mixer, rack) EQ and see if that clears up the distortion.

Finally, realize that even though the PVs 12 Sub is a powerful and high output unit, it does ultimately have limits, 

and it may need additional powered Subwoofer units to provide enough sound output or coverage. In this case, 

try turning the mixer levels down a little to see if that clears things up.  If, after checking all the things listed to 

check and anything else you can think of to check safely, and the system still exhibits problems, carefully note all 

conditions and check with your Peavey dealer for advice.

Care and Maintenance

YourPVs12 Sub is a sturdy and durable product and will provide years of reliable use if properly cared for. Use 

common sense and read the safety warnings to avoid hazardous operating conditions.

The unit must be disconnected from the AC power source before any work is done on it. Refer all servicing to 

qualified service personnel.

Sunlight/Heat

Avoid prolonged exposure to direct sunlight, as this may cause the unit to overheat and thermally shut off.

Excessively hot operating conditions can also cause a thermal shutdown.

Do not store in extremely hot or cold conditions or extremely high humidity. Always allow unit to come to room 

temperature before use.

Cleaning

Never clean the PVs 12 Sub while plugged in or turned ON!  When the unit has been fully disconnected from 

AC power sources, use a dry cloth to remove soil or other dirt.  Never use strong solvents on the PVs 12 Sub, as 

they could damage the cabinet.  Do not allow ANY fluids to drip inside the PVs 12 Sub.

Touchup

For a touch-up of any damage to the black painted finish of the PVs 12 Sub, you can use a black spray paint such 

as Peavey Commercial Sound, Black Touch-Up Paint, Peavey part number 00052110.  Follow the directions on 

the can for safety and best results.

Check for Secure Hardware

After the first few months of use and periodically thereafter, check the hardware of the PVs 12 Sub for tightness, 

including the rear panel screws and the screws that hold the grille and cabinet together.

The unit is subject to a great deal of vibration, and this could cause them to loosen with use.