IEC Mains Connector
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for
the intended operating voltage is included in the carton.
NOTE:
Never break off the ground pin on any equipment. It is provided for your safety. If the
outlet used does not have a ground pin, a suitable grounding adapter should be used and the
third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure
that the equalizer and all associated equipment is properly grounded.
NOTE: FOR UK ONLY
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow
must be connected to the terminal that is marked by the letter E, the earth symbol, colored green, or
colored green and yellow. (2) The wire that is colored blue must be connected to the terminal that is
marked with the letter N or the color black. (3) The wire that is colored brown must be connected to the
terminal that is marked with the letter L or the color red.
TRS Balanced Output
These 1/4" tip/ring/sleeve (stereo) jacks provide balanced output when used with TRS connectors and
2-conductor shielded cables. When used with a mono 1/4" (TS) phone plug, the output is unbalanced.
XLR Output
These male 3-pin connectors provide balanced output when used with female XLR connectors.
XLR Input
These female 3-pin connectors provide balanced input when used with male XLR connectors.
R E a R P a N E L
7
8
9
10
8
7
8
9
10
8
8
9
10
8
7
8
9
10
