Pebaro 2010, Operating Instructions Manual

Before using this tool, please, read attentively these instructions and fol- 

low the safety rules when using it. No guarantee is given for damages or 

accidents due to non-observance or these instructions and safety norms. Keep these 
directions and hand them over together with the tool if and when giving it away.

The rechargeable screwer is not to be used for purposes different from the one 
it was made for. This tool is meant for domestic and private use only.

  Caution! 
  •  To be used solely under the control and responsibility of an adult.
  •  The battery is to be charged by adults only!
  •  Children are not allowed to connect electric appliances to the mains or 
    use them without supervision of an adult.
  •  Charger not suitable for other types of tools!
  •  Charge exclusively with its pertaining charger!

OPERATING

Charging the battery

The screwer is delivered with the integrated Li-ion battery already charged. 
After some charging and  discharging the battery performance is at its top. 
Make sure the voltage of the main is the same as the one mentioned on the plate 
fixed on the charger (F). Plug the charger into the main tap and the connecting 
plug (G) to the charging plug (E). The red LED indicates the battery is charging. 
Pressing the key (D) one can see the charge level as the three LED lamps show 
the state of charge of the Li-ion battery. It takes abt. 5 hours to charge a fully 
discharged battery.

Fitting the screwing bit

Choose the screwing bit to match size and shape of the screw head and fit it into 
the bit slot (A).