ENGLISH
7
Mounting instructions to guarantee excellent
antenna performance:
RCA Transmitter has an integrated magnet that can be used
to attach the device to a ferromagnetic
surface e.g. the case
of an AV Amplifier.
Please note that metallic surfaces prevent radio transmission and
therefore the antenna should not reside in between two metallic
bodies. However, both transmitter and receiver can be placed on
top of an amplifier or to the side of it so that the antenna is visible.
Best transmitting on receiving conditions can be achieved when
transmitter and receiver antennas are physically oriented into the
same direction and typically upwards.
AV Amplifier
AV Amplifier
AV Amplifier
Wireless Amplifier RCA2AMP
24V DC
ON - OFF
LED indicator
How to switch AMP Receiver’s power off
ON - OFF Button
AMP Receiver can be powered off and on by pushing the ON - OFF
Button until the LED Indicator blinks three times. If you push this botton
continuously, AMP Receiver will change the power status from power
and on
off to power on and back blinking the indicator each time.
Receiver goes from power off to power on
Receiver goes from power on to power off
Button is pushed