Peco 50721201, Operator'S Manual

19

Model Number 

Serial Number

PECO

OUTDOOR POWER EQUIPMENT

Arden, North Carolina 28704

WRITE THE MODEL AND SERIAL NUMBER IN

THE BOX ABOVE FOR FUTURE REFERENCE.

Unit Model Number:_________________________________

Unit Engine Size: __________________________________

Unit Serial Number: _______________________________

Date of purchase: _____/_____/_________

Dealer/Distributor Name: _________________________________________

Address: ___________________________________ State:___________ Zip:____________

Phone Number: ____________________________

Address: PECO Inc.

100 AIRPORT ROAD

Arden, NC 28704

Phone #: (828) 684-1234 or Toll Free: (800) 438-5823

Email: peco@lawnvac.com

SECTION V

PARTS AND SERVICE

5-1 Parts And Service Information

PECO collection system owners should record the name 
and telephone number of their Service Center. Your 
Service Center will be happy to supply replacement 
parts, accessories, and do any service or repairs to your 
collection system. If for any reason your Service Center 
is unable to service your collection system or supply 
replacement parts, contact PECO and include the 
following information on the chart below. 

THE SERIAL NUMBER PLATE IS LOCATED ON THE

ALUMINUM BOX NEAR THE DUMP HANDLE

    safety decals. Replace any missing or illegible decals.
2. Inspect the unit for worn or damaged components. 
    Repair or replace before the next use. Any 
    replacement component installed during repair shall 
    include the component’s current safety decal specified 
    by the manufacturers to be affixed to the component.
3. Check belt for proper tension.

4-2 Lubrication

NOTE: 

Use only white lithium based grease for 

lubrication of the shaft on the blower assembly.

1. On initial use: Grease the fitting on the blower shaft.
2. Every 25 hours of use: Re-grease the grease fitting.
3. Every 200 hours of use: Check oil levels in gear box.
    Oil in gear box should cover the gears. If not, fill using 
    an EP90 weight oil. 6oz. will fill the gear box from 
    empty.