11
10
9
8
DCC-1
Digital Compass/Clinometer
North American User Guide
USING the DCC 1
Compass Function (Co)
Press the button
one (1) time. The
display reads
Co
to
identify the current
function, and the
compass aim (0 -
359°) is shown in
the display. Use the
sighting line (– + –)
in the display to guide your aim, trying to maintain a
horizontal position while sighting.
The DCC-1 will
compensate the
compass angle
if tilted in any
direction up to
±10°, however,
the steadier the
instrument is held,
the better the
function.
Tilt indicator directs to
point instrument UP to
obtain level.
Tilt indicator directs
to point instrument
DOWN to obtain level.
Instrument in
Compass mode (Co)
Current bearing
displayed
When adjusting
CLOCKWISE
or COUNTER
CLOCKWISE,
gently rotate the
instrument along
an imaginary axis
through the sight.
Exit the Compass (
Co
) function by pressing the button
once, or jump directly to the Angle mode by pressing and
holding the button for 2 seconds until the Angle function
(
Ang
) is displayed.
Angle Measuring Function (Ang)
Press the button two (2) times. The
display reads
Ang
to identify the Angle
function, and the current vertical
Angle (-90.0° to 90.0°) is shown in
the display.
Use the sighting line (– + –) in the
display to guide your aim to the
desired target. Exit the Angle function
by pressing the button once.
Adjust instrument
CLOCKWISE to obtain
level.
Adjust instrument
COUNTERCLOCKWISE
to obtain level.
DCC-1 Technical Specifi cations
•
Vertical Angles
-90.0° to 90.0°
•
Resolution
0.1°
•
Accuracy
0.2°
•
Horizontal Angles
0 to 359° (0° = North)
•
Resolution
1°
•
Accuracy
2.5°
•
Battery
One 1.5V AA
Warranty and Service Information
Peco Sales, Inc. warrants that this product shall be free
from defects in materials and workmanship, under normal
intended use, for a period of one (1) year from the date of
purchase. The warranty excludes batteries, accessories
and any written or downloadable materials. The warranty
does not apply if the product has been improperly
installed, activated, calibrated or operated in a manner
not in accordance with the User Guide. Warranty is also
automatically expired if the product has been exposed to
external force and warranty is not applicable for cosmetic
defects.
The limited warranty time covers obvious fabrication defects.
Defects in the electronic components that are impossible for
the manufacturer to detect prior to assembling and shipping
of the product may occur. Peco Sales, Inc. assumes no
liability for problems of this nature and claims no liability
for any loss of business, profi ts, savings, consequential
damages or other damages resulting from use of the
products described. Signs of misuse, negligence, cosmetic
damage or accidents automatically withdraw the warranty.
Warranty is valid in the country of purchase. A product
covered by warranty will be subject to exchange, service and
repair or according to special agreement between seller and
buyer, within the frames of the limited warranty. Peco Sales,
Inc. reserves the right to determine which option will be most
suitable for each separate case after having examined and
evaluated the product.
Proof of Warranty
For a valid warranty, a copy of invoice or dated receipt of
your purchase must be presented. The serial number of the
returned product must be clearly stated upon return. Call
800-752-8460 or visit http://www.pecosales.com/home/
terms.asp for return information.
Return freight charges are the responsibility of the customer,
except on instruments covered under warranty. If warranty
has expired or is deemed null and void, all freight charges are
the responsibility of the customer.
Peco Sales, Inc. will perform repair and service of products
where warranty has expired when possible. Cost estimates
will be provided upon examination and evaluation of the
returned product for cost approval.
© Copyright 2009 Forestry Suppliers, Inc. All rights reserved.
No part of this document may be reproduced without the express
permission of the publisher.
Post Offi ce Box 8122
Jackson, MS 39284-8122
T: 800-346-6939
F: 877-882-2466
Peco Sales is a wholly owned subsidiary wholesale division
of Forestry Suppliers, Inc., Jackson, Mississippi, USA
Printed in Sweden
7168_Instructions-c.indd 1
8/12/09 9:56 AM
