7
Secure the left and right frame brackets to the rear frame of the mower using (2) 1/2”-13 x 1-1/4” HHCS P#(K1232), (2)
1/2” flat washers P#(K0055) and (2) 1/2”-13 nylon flange locknuts P#(K2012) PER BRACKET. Secure the bottom
mounting holes with (1) 5/8”-11 x 1-1/2” HHCS P#(K1251) and (1) 5/8”-11 nyloc nut P#(K1316). Refer to Figure D.
X-Diablo, Diablo and DiabloMP Series
Secure the left and right frame brackets and (2) frame mount spacers P#(B0840) to the rear frame of the mower using
(3) 1/2”-13 x 1-1/4” HHCS P#(K1232), (3) 1/2” flat washers P#(K0055) and (3) 1/2”-13 nylon flange locknuts P#(K2012)
PER BRACKET. The frame mount spacers will mount to the inside, between the frame brackets and mower frame.
Refer to Figure C and D.
X-Series
and secured with clamp.
See Figure B
Exhaust pipe must be cut off 1.5” from original
Left and Right Frame Bracket Installation
Secure the left frame bracket P#(B0826) and right frame bracket P#(B0825) to the rear frame of the mower using the
mounting holes where the rear guard was removed.
Note: On Diablo and DiabloMP
length. 90 degree diverter must be attached
Left Frame
Bracket
(3) 1/2”-13 x 1-1/4” HHCS
(3) 1/2” Flat Washers
(3) 1/2”-13 Locknuts
(PER BRACKET)
NOTE:
X-Diablo, Diablo and DiabloMP series will need
to have the muffler guard removed and replaced with
muffler guard P#(B0831) in a later step.
Remove the rear guard and hardware from the mower
frame. Remove the rear right anti-scalp wheel and
hardware. Refer to Figure A.
(2) 1/2”-13 x 1-1/4” HHCS
(2) 1/2” Flat Washers
(2) 1/2”-13 Locknuts
(PER BRACKET)
Left Frame
Bracket
(1) 5/8”-11 x 1-1/2” HHCS
(1) 5/8”-11 Nyloc Nut
(PER BRACKET)
Cut Here
1.50"
Rear
Guard
Anti-Scalp
Wheel
Muffler
Guard
Figure A
Figure B
Figure C
Figure D
Summary of Contents for Pro 12 DFS 52621201
