36
37
E
n
g
lis
h
E
n
g
lis
h
1
2
3
5
6
Page Enter
Light
Up
Down
4
Smart
1
Instrument display
Assistance level
Total distance
Speed
Batter y power
charging
Bluetooth
2
3
5
4
Functions
Functions
Functions
1
Left grip
Left brake
Instrument control button
Instrument support
right brake
Rear gear change indicator
Rear gear change lever
Right grip
2
3
4
5
6
7
8
Overview
Functions
9
10
11
12
1
Saddle
Batter y
Handlebar
2
3
4
Brake system
Instrument(HMI)
Control buttons
5
6
7
8
Front wheel
Fork
Pedals
Kickstand
Chain
Rear wheel
13
Electric motor
2
5
3
4
1
6
7
7
6
1
Backlight switch
Up
Down
Smart mode
Page
Enter
2
3
5
4
6
7
2
9
11
12
13
1
3
4
5
6
8
10
Safety
Please read the information of qualified and authorized professional distributors in the
user's manual.
Safety Equipment
It is recommended to turn the light on even when riding at daytime. As an electrically assisted bike,
the Dar fon Innovation bike is subject to road traffic regulations, such as the German
Straßenverkehrs-Zulassungs-Ordnung (StVZO). The Darfon Innovation bike is equipped with the
lighting system required for active and passive parts when riding on a road, and an adequately
designed brake system as well. The lighting system features that following:
• Front reflector, white
• Rear reflector, red
• Reflectors on the wheel spokes
• Yellow reflectors on the pedals
For the safety of rider, please go to a BESV-authorized dealer for regular service of the e-bike.
Proper Accessories
You may need a helmet to ride an electric bike depending on the country you are in. However,
Darfon Innovation recommends you to wear a helmet that fits you and protective eyewear
regardless the requirement of helmet. Wear bright-colored clothing that catches attention when
on a Darfon Innovation bike for a joyride, and a comfortable pair of shoes that are fit for
pedaling. Familiarize yourself with local traffic rules and requirements and keep them in mind
when riding on a road. It is for the safety of yours and others on the road.
Pre-riding Check
Check the Tyres and Wheels
While riding an electric bike, the tire valve may break if you sit one-sidedly on the bike. If this
happens, the tire will lose pressure and there is a risk of accident. Therefore, always check that
the valve is at the correct location. It has to extend from the edge of tire inclining towards the
right hand side. Correct the valve immediately if the position is off. Check the following every
time before you mount your bike:
• Check that the tires and wheels are intact without damage and whether the tires are pierced by
any foreign object. Damaged tire will lose pressure and further damage.
• The depth of tire treads.
• Normal activation refers to the two wheels rotating freely. If a wheel is not rotating in a perfect
circle, it is possible that the tire broken, has a damaged axle or worn spoke.
In addition, investigate the source of any unusual noise if necessary, and check the loads carried
and the tightened connection.
Check the Chain and Chain Cover
While riding an electric bike, the chain and cover that are not tightened may be slacking and
cause accident and injury. Make sure that the chain is engaged and tightened and that the cover
is secured every time before riding the bike. Check also that the chain and chain cover are
installed correctly to prevent falling off or sliding.
1
8
6
7
3
2
5
4
