Page 22
WARNING!
This vest is for positioning
only! The vehicle lap and
shoulder belt must always
be used with this restraint
(Figure F - Opposite Page)!
1. Open up the vest as shown
in Figure A.
2. Place the occupant in the
restraint.
3. Wrap the right side of the
vest around the occupant
(Figure B).
4. Wrap the left side of the
vest around the occupant
and Velcro it to its left side
(Figure C ).
Installation of Occupant with Positioning Vest
A
B
C
Page 31
Installation of the EZ-Up Head Rest When there is
not a Vehicle Head Rest, Continued
notch (See Arrow - Fig-
ure C - Opposite Page) in
the support plate.
6. Repeat Steps 4 and 5
with the other side of the
support plate (Figure D -
opposite page).
7. Close the Velcro tabs on
each side of the support
plate (Figures E, F, and
G).
E
G
F