Installation of the EZ-Up Head Rest to an Adjustable
Vehicle Head Rest
1. Remove the EZ-Up
Head Rest from the box.
2. Place it in front of the
vehicle’s head rest, with
the “tail” lying over the
top of the vehicle’s head
rest (Figure A).
3. Wrap the tail over the
top and around the back
of the vehicle’s head rest
(Figures A and B).
4. Pull the tail through to
the front side of the ve-
hicle’s head rest by pass-
ing it underneath and
between the two bars
that support the head
rest (Figures B and C).
Page 28
A
C
B
Page 25
Installation of Occupant with Positioning Vest,
Continued
F
NOTE: Verify that
the lap and shoulder
belt portions of the
vehicle’s lap and
shoulder belt are po-
sitioned as shown in
Figures F, G and H.
The lap belt portion
must be low over the
lower hips and upper
thighs.
The shoulder belt
portion must be posi-
tioned between the
occupant’s shoulder
and neck.
If the lap and shoul-
der belt portions are
not positioned prop-
erly, then do not use
this restraint.
WARNING!
Top of child’s ears
must not be above
top of vehicle seat
back (or head rest, if
there is one).
G
H