Page 24
Installation of Occupant with Positioning Vest, Cont.
WARNING! The Vehicle’s
lap AND shoulder belt must
always be used with this re-
straint!
1. Slide both belt guides up
against occupant’s thighs
(Figure A).
2. Grasp the vehicle’s lap and
shoulder belt latch plate and
route only the lap belt por-
tion through the first belt
guide (Figure B).
3. Continue to route the lap
and
shoulder belt around
the occupant and through
the restraint's belt guide on
the opposite side. (Figure C).
4. Secure the vehicle’s seat belt
by attaching the latch plate to
the buckle (Figures D and E).
B
C
D
E
A
Page 29
NOTE: It is important to
wrap the head rest tightly
for optimum perform-
ance.
5. While pressing against
the front of the head
rest, attach the hook Vel-
cro on the tail to the
loop Velcro on the head
rest (Figure C - Opposite
Page and Figure D).
6. Verify that the head rest
is snugly attached to the
vehicle head rest. If it is
not, then repeat Steps 2–
5.
WARNING!
Top of child’s ears must
not be above top of vehi-
cle seat back (or head
rest, if there is one).
Installation of the EZ-Up Head Rest to an Adjustable
Vehicle Head Rest, Continued
D
