O
PERATION
Combination Warmer
▪
Operator’s Manual
▪
MN-47424
▪
Rev 1
▪
4/21
33
How to Operate the TriMode Warmer
Before you begin
The warmer must be connected to electric power and turned on.
Procedure
To operate the warmer, do the following.
Step
Action
1.
Select
the operation mode.
▪
Press
the irrigation button
for irrigation mode.
▪
Press
the injection button
for injection mode.
If irrigation or injection are selected, the operation mode will illuminate
.
▪
Press
the blanket button
for blanket mode.
The blanket operation mode icon will not illuminate.
Continued on next page
WARNING:
Personal injury hazard.
Do not operate the warmer in the presence of a flammable
anesthetic mixture with air, oxygen, or nitrous oxide; in
oxygen-enriched environments; or in any other potentially
explosive environment.
WARNING:
Personal injury hazard.
Verify the fluid temperature prior to using the fluid. Refer to the
fluid manufacturer’s label for recommended warming
procedures.
Do not use any fluids that are warmed above the suggested
temperature.
NOTICE
Do not overload the cavity.
Refer to topic
Specification Information
for the storage cavity
capacity.
NOTE:
Open the door to cool the cavity before changing
from a higher temperature to a lower temperature.
