PedigreeTechnologies.com | Support: (701)-499-0022
6
Test Camera Functionality
STEP ONE
Start the truck’s engine.
STEP TWO
Make sure that the camera has power
(indicated by
the blue LED next to the camera lens, may take 30-45
seconds to receive power).
Blue LED next to camera lens
CameraView
STEP THREE
On the tablet, open POV, but
stay logged out
.
STEP FOUR
Tap the 3-dots menu in the upper right corner of POV, and then select “Camera Setup”.
STEP FIVE
The app will look for cameras near you, and as long as there is power to your camera, the app will
find it. It will take 30 to 60 seconds to find and connect the camera. Once it connects, you will see
the view from the camera, allowing you to adjust angle if necessary.
Connecting to camera automatically
View from camera
OPTIONAL MANUAL ENTRY OF SERIAL NUMBER
If there are multiple active cameras near you, it may be helpful to use the Camera Serial Number
button to enter the camera’s individual serial number. Find the serial number on the label on the
top of the camera.
SN = serial number
Connect Serial Number
