PedigreeTechnologies.com |
Support: (701)-499-0022
CameraView
Testing
Secure the Camera
STEP ONE
Place the tamper tape across the camera and the
mount (where the camera rotates) to secure the
camera position.
(Avoid covering the camera vents
or serial number tag.)
Tape the inline cable to the camera mount to
prevent removal of the cable.
GOOD MOUNTING
• The hood should barely be visible at the bottom
of the screen.
• No lighted accessories inside the vehicle should
interfere with the camera, including at night.
• Horizon line is level
• There is nothing hindering the view of the camera
• Camera view is within the area covered by the
wiper blades.
Good = level horizon, hood barely visible
BAD MOUNTING
• Too much of the hood is visible.
•
The field of view is occluded
• Horizon is not level
• Objects in the cab are visible in the camera view
•
Reflection of objects, driver, or lights are visible in
the camera view
Bad = too much hood visible
Horizon not level
