ISSUED: 12-22-14 SHEET #: 180-9064-4 01-20-16
12
2. VGA Media Source
• Video - Connect the VGA cable from the media
source’s VGA output to the Transmitter’s VGA input.
• Audio - A 3.5mm stereo audio cable is required (not
included) to transmit audio when using this input.
Connect the 3.5mm stereo audio cable from the VGA
source component’s audio output to the Transmitter's
PC AUDIO-IN port.
3. Component Media Source
• Video – Connect the Component Video
output (YPbPr) from the source, into the
Component/Composite Adaptor (included). Connect
the Component/Composite Adaptor
to the PC-IN port on the Transmitter.
• Audio - A 3.5mm stereo audio cable is required (not
included) to transmit audio when using this input.
Connect the 3.5mm stereo audio cable from the VGA
source component’s audio output to the Transmitter's
PC AUDIO-IN port.
• Connect HDMI cable from the Transmitter’s pass-
thru output port to the input of the display device
to enjoy
the video coming through HDMI1 only.
Before starting the installation, please ensure that all source components (Blu-ray player, cable box, etc.) and the display
equipment (TV, display, projector, etc.) are turned off.
For initial setup of your PeerAir™ Pro system complete steps A, B, C, D, E and F in order.
A) Connecting Source Components To The Transmitter
1.
HDMI Media Source
•
Note
: It is recommended that the HDMI1 input port be used if only one HDMI source component is present.
INSTALLATION AND OPERATION
• Connect HDMI cable from the source components
output to the Transmitter's HDMI1 or HDMI2 or
HDMI3
input
port.
