ISSUED: 02-18-09 SHEET #: 090-9164-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
4 of 6
A
Arm assembly (
A
) can be mounted to mounting
surface with a thickness of 1/3" - 3.5" (10 - 89 mm).
Insert the clamp onto mounting surface as shown
below.
Turn handle to tighten arm assembly (
A
) to
mounting surface until firmly attached.
1/3" - 3.5"
MOUNTINg SURFACE
CLAMP
MOUNTINg SURFACE
1
Clamp Installation Method
1-1
fig. 1.2
fig. 1.1
Drill .5" (13 mm) hole into mounting surface. Place pipe assembly (
A
) onto mounting surface and secure using one
bolt (
e
), one spring washer (
F
), one flat washer (
G
), and one bottom washer (
H
) as shown in figure 1.1.
Tighten bolt (
e
) using 8 mm wrench (
I
) as shown in figure 1.2.
NOTe:
Be sure fasteners and washers are assembled in correct order as shown in detail 1.
DeTAIL 1
2
Hole Installation Method
MOUNTINg SURFACE
MOUNTINg SURFACE
H
G
F
e
I
A
A
