ISSUED: 02-18-09 SHEET #: 090-9164-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
6 of 6
NOTe:
This product is factory set for a 19" (483 mm) monitor. When changing the size of the monitor, adjust the
control bolt with M4 wrench as shown in figure 4.1.
Adjust control bolt at top of arm assembly (
A
) with M4 wrench (
D
) as shown in figure 4.2.
Bend lower arm to access control bolt. Adjust control bolt with M4 wrench (
D
) as shown in figure 4.3.
Insert cable into cable guide of arm assembly (
A
).
Open gap to press fit cable as shown in detail 3.
NOTeS:
• Turn control bolt clockwise
(+) to adjust for weight greater
than 8.8 lbs (4 kg).
• Turn control bolt counter-
clockwise ( - ) to adjust for
weight less than 8.8 lbs (4 kg).
4
5
Control Bolt Tension Adjustment
Cable Management
fig. 4.1
fig. 4.2
fig. 4.3
CABLE gUIDE
CABLE
DeTAIL 3
D
© 2009 Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Be careful not to pinch fingers when adjusting arms
of arm assembly (
A
).
CAUTION
