9 of 11
ISSUED: 08-17-09 SHEET #: 090-9186-4 02-09-10
Secure upper adapter plate to lower adapter plate
using two M5 x 25 mm washer head security
screws (J).
Use security wrench (O) to fasten all screws.
Knobs must be level before adjusting for Swivel, Roll and Pitch.
12
Grip sides of projector and gently rotate to desired
position.
Swivel Adjustment
SUPPORTING SURFACE NOT
SHOWN FOR CLARITY
D
J
14
UPPER ADAPTER PLATE
LOWER ADAPTER PLATE
Adjust mount to desired mount position using chart
on page 3 fig. 1.1. Once mount position is
determined tighten all M5 x 12 mm screws as
shown below.
12-1
TIGHTEN ALL M5 X 12 MM SCREWS
13
J
KNOB
