PEERLESS ACC951 Installation And Assembly Download

Page: 1 / 3

ISSUED: 10-31-10 SHEET #: 120-9091-2 11-08-10

Parts

List

Description

Qty.

Part

accessory bracket

201-P1746

Installation and Assembly -

A/V Component Shelf Accessory

Bracket Connects DS and VPM component shelves to SA752,
SA761, SA763 or SA771 articulating wall mounts

Models: ACC951

Max Load Capacity:

30 lb (13.7 kg)*

Some parts may appear slightly
different than illustrated.

Before you start make sure all parts listed are included
with your product.

IMPORTANT! Read instruction sheet before you start installation and assembly.

If wall arm (sold separately) has not been
mounted, skip to step 3 on page 2.

Remove two M10 x 15 mm screws from bottom
holes of adapter plate. Loosen two M10 x 15 mm
screws from top holes of adapter plate.

*Combined load of equipment, hardware and

components is not to exceed max load capacity of

wall arm (sold separately)

Unhook universal or dedicated adapter bracket
from adapter plate.

UNIVERSAL

ADAPTER BRACKET

ADAPTER PLATE

REMOVE

M10 X 15 MM SCREWS

LOOSEN

M10 X 15 MM SCREWS

Summary of Contents for ACC951

Page 1: ...l parts listed are included with your product IMPORTANT Read instruction sheet before you start installation and assembly If wall arm sold separately has not been mounted skip to step 3 on page 2 Remo...

Page 2: ...o M10 x 15 mm socket screws from universal adapter bracket Hand thread two M10 x 15 mm socket screws through top slots of accessory bracket A into top holes of universal adapter bracket as shown in fi...

Page 3: ...uches bottom of display and tighten all fasteners using a 6 mm allen wrench included with wall arm Attach DS or VPM component shelf sold separately to bottom tray using M5 screws included with DS or V...