ISSUED: 09-30-02 SHEET #: 055-9109-5 12-22-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
2 of 3
Align holes of bracket from cable assembly (AA) to holes on cable adapter (DD) as shown in detail 2. Fasten cable
assembly (AA) to cable adapter (DD) with two #10-32 serrated washer head socket pin screws (CC), and tighten
using 4 mm security allen wrench (BB).
Insert key into lock. Then insert lock into slot on projector and turn key counterclockwise 90° to lock. Remove key.
If installing the security cable onto an Encore Mount, remove two 20 mm screws from PJRL 411 assembly as
indicated below. Attach cable adapter (DD) using existing 20 mm screws.
Note: The cable can be attached to the Encore Mount on either of the four sides of the PJRL 411.
existing 20 mm screws
AA
CC
BRACKET
DD
DETAIL 2
PJRL411
DD
