Visit the Peerless Web Site at www.peerlessmounts.com
ISSUED: 03-26-09 SHEET #: 125-9060-5 07-26-13
Mounting and Removing Flat Panel Screen
Hook adapter brackets (
C
) onto wall plate (
A
) as
shown in fig. 5.1. Then slowly swing screen in as
shown. Tighten M5 x 25 mm socket pin serrated
washer head screws (
F
), using security allen
wrench (
G
), clockwise at least six times to prevent
screen from being removed as shown in fig. 5.1.
Screen can be adjusted horizontally if desired.
NOTE:
To lock the screen down, fully tighten M5 x
25 mm socket pin serrated washer head screws (
F
)
to wall plate as shown in cross section.
To remove screen from mount, loosen M5 x 25 mm
socket pin serrated washer head screws (
F
) and
swing screen away from mount, and lift screen off of
mount.
5
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screen.
WARNING
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount.
Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
fig 5.2
C
A
F
fig 5.1
