9 of 38
ISSUED: 12-11-08 SHEET #: 095-9287-2 06-02-09
Cord Management
If more or less tension is desired in the arm pivot
points, do the following:
• To increase tension, turn tension screw(s)
clockwise with 3/16" allen wrench.
• To reduce tension, turn tension screw(s) counter-
clockwise with 3/16" allen wrench.
NoTe: Do not turn more than half a turn.
Secure cables to top or bottom of wall mount arm (
A
)
using cable ties (
e
) as shown.
6
5
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
WARNING
TeNSION SCrewS
A
e
e
COrD
Arm Tension Adjustment
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 w. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com
