ISSUED: 1-26-04 SHEET NO: 055-9819-1
Peerless Industries, Inc.
3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941
www.peerlessindustries.com
page 1
of
2
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark and Armor Lock and Armor Lock Plus are trademarks of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
MODELS: PRS 35, PRS 35-S, PRS 35-W, PRS 40, PRS 40-S,
PRS 40-W, PRS 45, PRS 45-S, PRS 45-W
The
PRS Series Clamp-Style Universal Projector Mount
is the most
low profile universal mount available today. It offers a quick and easy
installation in addition to unmatched versatility. The mount ships pre-
assembled, can be attached to any common ceiling structure, and is
offered in multiple colors to complement any setting.
Features:
• +5°/-20° Pitch, +/-10° Roll, 360° Yaw (when attached to an extension
column), +/-15° Yaw (when flush mounted), which enables the image
to be perfectly aligned with the screen
• Mount completely pre-assembled to save you time
• Independent roll, pitch, and yaw adjustments provide easy image
alignment
• Can be mounted directly to a single wood beam or concrete slab
without disassembling the mount and without reinforcing the ceiling
• Can attach to 1 1/2" extension column, 3/4" extension column, or 3/8"
threaded rod
• Armor Lock
™
security screws pre-installed for a secure installation in
minutes
• Quickly release the projector for maintenance with the simple turn of a
knob
• Built in cord management access hole provides complete access to
route cords through extension column to keep cords hidden
• 4 adjustment points allow a quick, simple installation
• Final security lock down is optional to use
• Easily and quickly attaches to clamp-style universal adapter plate
• Universal clamp designed to hold projectors either inverted or upright
• Ideal for projectors that do not have mounting holes or cannot be
inverted
• Large side openings in clamp provide access to projector ports*
• Offered in black, white, and silver to complement any setting
• Low profile allows the projector to be close to the ceiling
• Offers the fastest installation to reduce installation time and costs
* It is the responsibility of the installer to check the vents and ports on
the projector to ensure that they are not obstructed by the universal
mount. Blocked vents may cause damage to the projector.
A R C H I T E C T S S P E C I F I C A T I O N S
The PRS Series Clamp-Style Universal Projector Mount shall be a Peerless model
and shall be located where indicated on the plans. It
shall feature 25°(+5°/-20°) pitch, 20°(
+
10°) roll, 360° yaw (when attached to an extension column), and +/-15° yaw (when flush mounted). It
shall have a 25 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of the projector. It shall be
constructed of aluminum alloy finished in black, white, or silver. Assembly and installation shall be done according to instructions provided by the
manufacturer.
R
TECHNICAL DATA SHEET -
PRS Series Clamp-Style Universal
Projector Mount
Accessories:
• Ceiling Plates (various models available)
• Cord Wrap (ACC 852, 852S, 852W)
• Fixed and Adjustable length Extension
Columns, 1 1/2" NPT (“EXT” or “ADJ” models)
• Fixed length Extension Columns, 3/4" NPT
(“FLP” models)
• Armor Lock Plus
™
security cable with Lock
(ACC 020)
• Armor Lock Plus security cable (ACC 021)
• Side to Side Adjuster (ACC 830)
Dimensions:
For product dimensions, see page 2.
PRS
SERIES
PROJECTOR
MOUNT
