ISSUED 08-09-06 SHEET #: 055-9470-1
Visit the Peerless Web Site at www.peerlessmounts.com
8 of 11
For customer care call 1-800-729-0307 or 708-865-8870.
Open the mount and remove thumb screw as
shown.
Note:
The upper tray of the mount will now slide
off of the lower tray.
THUMB
SCREW
4
Flip projector upside down. Attach lower tray to
the bottom of the projector using appropriate
number of screws (
K,L,M,N,O,P,Q,R,S
) , washers
(
I
) and spacers (
F
) as shown. Use 4 mm allen
wrench (
S
) to tighten screws.
Important
: If projector does not have at least
three mounting holes, do not use this tray
assembly.
Note
: Some projectors have feet which can be
removed and the corresponding threaded insert
can be used for a mounting hole.
Note:
Projector may differ slightly in appearance.
Installation of Projector
5
• Do not overtighten! Overtightening may cause perma-
nent damage to the projector. Torque to 26-35 in • lb (30-
40 kg • cm).
WARNING
PROJECTOR
LOWER
TRAY
SCREW
WASHER
SPACER
