5 of 5
ISSUED: 07-26-05 SHEET #: 024-9009-2 12-01-06
2
Attach wall plate (
A
) to togglers (
C
) with 1/4-20 x 2.5" flat head phillips screws (
D
), and washers (
E
).
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
WARNING
A
E
D
C
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
