15
CHA NGING NUMERIC DISPLA Y LA BELS
A sheet of additional function labels is provided for customizing the data
display of your WEATHER PICTURE. Use scissors to cut the labels (up
to the black edge). Labels are designed to remain in place when
installed, but double-sided tape may be used if desired to keep a
function label in position. To change a label:
1) Place the WEATHER PICTURE face down on a soft flat surface.
Laying a soft towel down first is recommended to help prevent
scratching the nameplate. On Metal Frames: Loosen the 8 screws in
the corner brackets of the frame. On Teak Frames: Loosen the
frame retaining clip screws and rotate the clips to allow removal of the
frame.
2) Turn the WEATHER PICTURE face up again. On Metal Frames:
Remove the metal frame from around the WEATHER PICTURE by
pulling the four frame parts away from the WEATHER PICTURE
housing. On Teak Frames: Lift frame up from the housing.
3) Carefully lift the nameplate out and set it aside.
4) Replace Display Function Labels as desired, using double-sided
tape to retain them if necessary.
5) Carefully replace nameplate in the slight recess of the housing
front.
6) Metal Frames Only: Install corner brackets in the two short frame
parts. Replace the long frame parts on their respective sides of the
housing. Then replace the short parts (with corner brackets).
7) Once again, place the WEATHER PICTURE face down on a soft
flat surface. On Metal Frames: Tighten the corner bracket screws.
On Teak Frames: Rotate the frame retaining clips and gently tighten
the screws. Do not overtighten.
PEET BROS.
HI WIND TODAY
HI TEMP TODAY
TEMPERATURE
R
PEET BROS.
W
S
E
N
WIND CHILL
HI WIND TODAY
WIND SPEED
HI TEMP TODAY
TEMPERATURE
LO TEMP TODAY
RAIN TODAY
THE WEATHER PICTURE
FRAME
DISPLAY LABEL
NAMEPLATE
CORNER
BRACKET
HOUSING
