5. Position the assembled unit as desired.
Wall Mounting
1. Drill two pilot holes 5 in. apart for the supplied wood screws or
supplied drywall anchors. Mount at a height slightly above eye
level for best viewing angle.
2. Install the screws, leaving them about 1/8 in. out from the wall.
3. Insert the plug of the junction box cable into the back of the
control panel. Be sure it "clicks" into place.
4. If the junction box cable is to run down the wall, insert the cable
into the groove provided on the back of the keyboard/display unit.
5. Hang the keyboard/display unit from the two projecting screws.
Installing the Junction Box
1. Drill two pilot holes 3-1/2 in. apart at the desired mounting
location.
2. Mount the junction box; use wood screws (provided) for a
wooden wall or drywall anchors (provided) for a sheet rock
wall.
3. Plug in cables from the ac adapter, keyboard display unit,
thermometer, anemometer/wind vane, and rain gauge, if
applicable.
21
