- 10 -
it towards you while at the same time pushing it all
the way into the armrests (fig_a). To extend or remove
the tray, pull the central lever underneath it towards
you (fig_b) and move it outwards (fig_c). To remove
the tray, pull the side levers outwards and pull the
tray towards you. The high chair has a double tray.
The top tray can be easily washed in a dishwasher. To
remove it, detach it from the lower tray and lift it up
(fig. d).
3 ADJUSTING THE HEIGHT: The seat can be set at 9
different heights. To raise or lower the seat, pull the
two levers upwards (fig. a) and move it to the required
position. The handle under the netting can also be
used to raise the seat (fig_b). This can also be done
with the child in the high chair.
RECLINING BACKREST: The seat can be reclined in 5
positions. To adjust it, raise the handle behind the
backrest (fig. c) and lock it in the required position.
This can also be done with the child in the high chair.
4 BRAKE: The product is packaged with the brakes on.
To move the high chair, press the lever and move it
forward until you can see GO (fig. a).
This will allow the high chair to be moved around
freely; you don’t need to keeping pressing it.
To put the brakes on, move the lever back until you
can see the word STOP and then release the button
(fig. b). Wheels are non-scratching.
5 ADJUSTABLE FOOTREST: the footrest can be set in 3
positions. To raise and lower it, push the two levers
downward (fig_b).
6
FIVE-POINT SAFETY HARNESS: To fasten the safety
harness, push the two waist strap buckles (with the
shoulder straps attached) into the leg divider until
they click into position (fig_a). To release it, press the
center of the buckle while pulling the waist strap
outwards (fig_b). To tighten the waist strap, pull the
ends on both sides. To loosen it, do the opposite.
7 The shoulder straps of the harness can be set at two
different heights. Partially remove the fabric covering
(fig_a), release the shoulder straps from the backrest
(fig_b) and pull them out from the fabric covering.
Insert the ends of the shoulder straps in the other
slots in the fabric covering and the backrest (fig_c),
then put the fabric covering back into the right
position on the backrest.
8 USE WITHOUT THE TRAY: to use the seat at the table,
remove the tray. To clip the tray on the rear supports
of the high chair, align and engage it with the
attachments (fig_b).
9 CLOSING AND REOPENING THE TRAY: Pull the central
lever underneath the tray towards you (fig_a) and
extend it as far as the red markers (fig_b), then swing
it upwards to lock it in place (fig_c). To reopen the
tray, press the lever under the armrest (fig_d), swing
it downwards, then pull the central lever towards you
and put the tray in one of the positions for use.
10 FOLDING UP: Before folding up the high chair, ensure
that the wheels are facing inwards (fig_a). Press the
red buttons (fig_b) and fold up the high chair (fig_c).
Fig_d shows a folded up high chair.
11 REMOVABLE COVERS: To remove the covers of the
seat, pull off the upper part of the fabric covering and
pull the harness straps through the backrest (fig_a)
and the fabric covering (fig_b). Lower the backrest
and pull out the leg divider strap from under the seat
(fig_c).
12
Unbutton the sack at the sides (fig. a) and pull up to
remove it (fig. b).
SERIAL NUMBERS
13 Information about the production date of the siesta
follow me can be found on the seat.
_ Product name, date of manufacture and serial
number.
This information is required for any complaints.
THE ORIGINAL ACCESSORY
PEGPEREGO
PegPerego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product’s accessories on
www.pegperego.com
CLEANING AND MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place. The maintenance have to be
regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil all metallic moving parts. Check all nuts
and bolts for tightness and tighten when required.
check all coverings for bolts and sharp edges and
replace when required. check swing seat and
attachments for evidence of deterioration. Replace
when required in accordance with the manufacturer's
instructions.
CLEANING THE SACK:
When washing, closely follow the instructions stated
on the label sewn into the cover.
Wash with a damp cloth and neutral detergent. Do
not wring. Do not use chlorine bleach. Do not iron. Do
not dry clean. Do not use solvents for stain removal.
Do not spin dry.
PEGPEREGO S.p.A.
PegPerego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO
9001 standard. PegPerego can make changes at any
time to the models described in this publication for
technical or commercial reasons.
PEGPEREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine PegPerego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
PegPerego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PegPerego S.p.A. and are
protected by the laws in force.
Summary of Contents for Siesta Follow Me
