Peg-Perego VIAGGIO 1 Via, Instructions For Use Manual

20

lining cannot be replaced by other lining that has 

not been specifically approved by the manufacturer 

because it is an integral part of the seat and is essential 

for safety purposes.

  •  Do not use the car seat without the protective shoulder 

pads as they are an integral part of the car seat and the 

safety system.

  •  Do not remove or replace the white part in polystyrene 

under the head rest and side wings since essential for 

safety purposes.

  •  Do not remove the adhesive and sewn labels. The 

removal of these labels could result in the product not 

complying with the law.

  •  Do not use the child car seat if it is broken or if there 

are missing parts, if it is second-hand or if it has been 

subjected to heavy impacts as a result of accidents, 

because it may be structurally damaged and be a 

hazard.

  •  Do not alter the product.

  •  This article is progressively numbered through its 

certification label, located on the bottom of the seat 

(fig. 51).

  •  If in doubt, contact the manufacturer or retailer of this 

child car seat.

  •  Contact the post-sales service for repairs, the 

replacement of components and information on the 

product. Contact information is provided on the last 

page of this manual.

  •  The car seat must always be fixed in the car, even when 

there is no child sitting in it. In the event of sudden 

braking, it could injure the passengers.

  •  Do not use the car seat if more than 12 years have 

elapsed from the date on the body (fig. 50). The natural 

ageing of the materials may mean the car seat does 

not comply with the laws on safety any more.

  •  Do not use accessories that have not been approved of 

by the manufacturer or competent authorities.

  Car seat, Group 1, “Universal” category, 

with ISOFIX & Top Tether, class B1

Type approved under standard 

*%

, for 

children of weight from 9 to 18 kg (1 to 4 years approx).

  •  Compatible with most car seats, though not all.

  •  The car seat can be correctly installed if the vehicle's 

use and maintenance manual indicates compatibility 

with "Universal", Group 1 ISOFIX class B1 restraint 

systems with Top Tether. For further information on Top 

Tether use, please see the following section.

  •  This child car seat is classified as “Universal” and meets 

stricter homologation criteria compared to previous 

models, which did not have the homologation label.

IMPORTANT

  •  Viaggio 1-2-3 Via must always be installed faced 

forward only on seats with ISOFIX and Top Tether 

connectors.

  •  Do not use without Top Tether. The Top Tether is 

essential in order to guarantee complete safety.

  •  Do not install Viaggio 1-2-3 Via in seats that are 

not in the direction of travel or are transversal with 

respect to the direction of travel.

  •  It is always advisable to fit the child seat on the 

rear seats and on the passenger’s side.

  •  If the child seat is installed on the front seat, it is 

advisable to place it as far as possible from the 

dashboard.

  •  This item has a progressive serial number.

  •  If you experience problems during the installation 

of Viaggio 1 2 3 Via, lift or remove the headrest.