Peg-Perego VIAGGIO 1 Via, Instructions For Use Manual

22

  Article components  

(fig. pag 2)

Inspect the content of the package and contact the 

Customer Care if some items are missing.

The child car seat includes:

  a)  head rest

  b)  backrest

  c)  seat

  d)  ISOFIX anchors

  e)  Top Tether hook

  f)  shoulder pads 

  g)  booster cushion

  h)  5-point safety harness

  i)  ISOFIX anchor ejection lever

  l)  seat recliner lever

 m)  instruction manual compartment.

The car seat is ready for use: no assembly required.

Instructions

  UNIVERSAL CATEGORY ISOFIX & Top 

Tether

  Fastening with ISOFIX & Top Tether

  1 

Pull the yellow lever at the front of the seat base (1) 

and fully eject the ISOFIX anchors (2).

  2 

Open the rear door and release the Top Tether hook.

  3 

Lengthen the Top Tether hook according to your car 

needs.

  4 

Secure the ISOFIX anchors in their housings until they 

click; a red/green LED on the sides of the base will 

indicate correct anchoring.

  5 

Pull the yellow lever (1) and simultaneously push the 

child seat (2) firmly against the car seat.

  TOP TETHER HOOK

IMPORTANT: There are 3 main variations to the 

Top Tether hook.

  6  Type A:

Lift the headrest and slip the straps underneath.

Fasten the TT hook of the straps to the clearly visible 

vehicle hook, as shown in the figure.

Pull the strap tight and check correct tension.

  7  Type B:

Lift the headrest and slip the straps underneath.

Fasten the TT hook to the vehicle anchor, placed on the 

rear of the vehicle's backrest, as shown in the figure. 

Tighten the belt and check belt tension is correct using 

the mechanism highlighted in green.

  8  Type C

:

Lift the headrest and slip the straps underneath.

Fasten the TT hook of the straps to the vehicle hook, 

placed in the boot. This is generally marked by the Top 

Tether symbol, as shown in the figure. Lift the cover 

and fasten.

 IMPORTANT: to fit the belts correctly, tighten 

them firmly.

For any other fastening system, consult your vehicle's 

instruction booklet.

  9 

To remove the child seat from the car seat, release the 

Top Tether (1); move the child seat away from the car 

seat by pulling the lever (2) and seat (3) simultaneously 

until the yellow side levers appear.

 10 

Once the side levers are visible, release as illustrated 

and remove the child seat.

  How to secure your child in the Viaggio 

1-2-3 Via car seat

 11 

Before placing the child in the car seat, release the 

harness using the red button on the crotch strap 

buckle.

12 

Lift the safety belt to make room for your child.

13 

Place the child in the car seat and arrange the harness 

over the child’s shoulders and waist, as shown in the 

figure.

14 

Lock the harness by overlapping (1) the tongues and 

inserting them into the buckle of the crotch strap (2) 

until they click into place.

15 

The child is now sitting correctly with the harness 

fastened properly.

 16 

Finally, tighten the shoulder straps until they are snug 

to the child’s body by pulling the central adjustment 

strap towards you as shown in the figure, taking care 

not to over-tighten the straps.