2/2
Step 4
Place first the USB HUB side of the top part as shown in the photo below.
Step 5
Tighten the 4 bottom screws to fully secure the enclosure (bottom and top parts together).
The silver Allen hex screws are already in place for your existing dovetail brackets or the top mini PC base plate on the new enclosure.
If you don’t use any of the above you can remove them.
DO NOT USE THE OLD SCREWS AS THEY DO NOT FIT ON THE NEW ENCLOSURE
In case you have the dovetail brackets and the mini PC baseplate.
www.pegasusastro.com
You are ready to go...
