15
5.3.5.2. Setting:
The function can configure the terminal parameters (auto power off, LCD backlight...) to optimize the
convenient of the operation.
Figure 5.3.5.2
1. Buzzer Pitch:
The span between 000-255 Hz can be set.
2. Record Prompt: The span between 0000-9999 ms can be set. This is the time span to display the
collected “record number” once the data file is saved to PC.
3. Date & Time:
Set the correct Date/Time (yyyy/mm/dd) (hh:mm:ss).
Figure 5.3.5.2.3
4. Power On:
This item is for defining which display window would be appeared when turns
terminal on.
If “1. Resume” is set; whenever the terminal turns on, the last display window
before terminal turns off would appear.
If “2. Restart” is set; whenever the terminal turns on, the MAIN MENU would
appear.
5. Auto Off:
The span between 00-99 minute can be set to turn off the terminal if there is no
action taken in the setting time.
6. Backlight:
The span between 00-99 second can be set to turn off the LCD display if there is
no action taken in the setting time.
7. Key Click:
To enable or disable the click sound while the terminal works.
8. Deletion:
The item provides the deletion of the collected data by manually or by
automatically after data file upload to PC.
