Owner’s manual
16
EN
−
Date Stamp
: On / Off. Select to stamp the date and time on
video screen as watermark.
−
Motion Detection
: On / Off. The DVR can be set to record
ONLY when motion is detected. This can be useful while your
car is parked. In this mode, DVR will record automatically after
sensing motion and for 10 seconds afterward. The DVR will
return to standby mode if no other motion is detected.
Take Photos and Set Photo Menu
1. Take Photos
Press the power key to enter the video mode as default; press the
Mode key to enter the Photo mode with icon
displaying on the
upper-left corner of the screen.
Then, hold the DVR firmly, then press REC / OK key to take
photos. Photos will be stored into memory card automatically.
2. Set Photo Menu
During photo mode, press MENU and REC / OK key to enter photo
menu settings.
−
Resolution: 12M / 10M / 8M / 5M / 2M
−
Exposure: EV -2.1 / -1.0 / 0.0 / +1.0 / +2.1
[Note]: It’s available to switch freely between Video Mode
and Photo Mode.
Playback Mode
1. Browse Files
After the DVR powers ON and enter the VIDEO mode, press the
mode key twice to enter the PLAYBACK mode, press the
UP / DOWN key to browse the video files or Photo files.
[Note] If the File Type (in System Setting) is chosen to be ‘VIDEO’,
then only VIDEO files (loop recording files) are available in
PLAYBACK mode. If File Type is chosen to be ‘EVENT’, then
only emergent video files are available in PLAYBACK mode. And
