3
• Wear suitable work clothes and non-slip shoes for
the purpose. Use hair nets if you have long hair, do
not wear jewelry or loose-fitting clothing that can
get caught.
• Never allow your habit of the machine lead to care-
lessness.
• Check that all safety measurements are in place
and in good working order. Check that all machine
parts are intact and are correctly mounted.
• Do not use a defective machine. Return it to an aut-
horized service workshop for repair.
• Use only recommended accessories and spare
parts. Any repairs and cable replacement must be
carried out by a qualified electrician to avoid danger.
• Only use the machine for the intended area of use.
The work is always safer and faster if the machine
is used for what it is designed for. Do not exceed the
capacity of the appliance.
• Prevent unintentional start-up by disconnecting the
power supply before service and repair or when the
machine is not in use. Never leave a machine unat-
tended when the power is on.
• Clean the machine after use and service it regu-
larly. Store the machine in a dry and protected place,
out of the reach of children.
• Handle cables carefully and protect hem from
heat, oil and sharp edges. Extension cable must not
be wound on a reel, pull the entire cable out of the
cable reel. Use only correctly dimensioned exten-
sion cables with regard to length and cable area in
relation to the current drawn.
• Avoid contact with earthed surfaces. The risk of
electric shock increases when you are grounded
Safety instructions for compressors
• The compressor is not intended for outdoor use.
• The compressor must be used in suitable environ-
ments (with good ventilation and an ambient tempe-
rature of between 0 ° and + 40 ° C) and never where
dust, acids, vapors, explosive or flammable gases
are present.
• Always maintain a safety distance of at least 4
meters between the compressor and the working
area.
• Connect the plug to a grounded electrical outlet
with the correct voltage and frequency that meets
current regulations.
• Only use correctly dimensioned extension cables
with regard to length and cable area in relation to
the current drawn. We advise against using exten-
sion cables of different lengths or adapters and
branch sockets. Always and only use the pressure
switch switch to switch off the compressor.
• Do not switch off the compressor by pulling the
plug out of the socket to avoid restarting with
pressure in the block.
• Always and only use the handle to move the com-
pressor.
• When the compressor is in operation, it must be
placed on a stable and horizontal surface to guaran-
tee correct lubrication.
• Place the compressor at least 50 cm from the wall
to allow optimal air circulation and guarantee cor-
rect cooling.
• Never aim the air jet at people, animals or your
own body (wear safety goggles to protect your eyes
from foreign particles that can be inflated by the air
jet).
• Never point a jet of liquid from a tool connected to
the compressor at the compressor itself.
• Do not use the machine if you are barefoot or if
you have damp hands and feet.
• Do not pull on the power cord to unplug the power
cord or to move the compressor.
• Make sure that the machine is not exposed to wea-
ther and wind (rain, sun, fog or snow).
• Do not transport the compressor with a pressuri-
zed air tank.
• Do not perform welding or mechanical work on the
air container. In the event of defects or rust on the
air tank, it must be replaced in its entirety.
• Do not allow the compressor to be used by inexpe-
rienced persons. Children and animals must be kept
at a safe distance from the compressor.
• Do not place flammable objects or objects made
of nylon or textile in the vicinity and / or on the
compressor.
• Do not clean the machine with flammable liquids
or solvents. Use only a damp cloth and make sure
you have unplugged it.
• The compressor is designed to compress air. The
machine must not be used for any other type of gas.
• The compressed air obtained from this machine
cannot be used to fill oxygen tubes for diving.
• Do not use the compressor without protection and
do not touch moving parts.
• This compressor is designed to operate with an in-
termittent factor to avoid overheating of the electric
motor. (Operating cycle 50% means, for example, 5
minutes of operation and 5 minutes of stopping).
The compressor should not be used for more than
15 minutes at the time. If the temperature become
too high, the motor's overheating protection trips
and automatically shuts off the voltage. Allow the
machine to cool before restarting.
