pela tools 506799, Manual

Service, repair and spare parts

All maintenance and repairs must be carried out by 

a qualified and qualified service workshop. Always 

unplug the machine before performing any 

maintenance or service. Only original parts may be 

used for any repairs.

Storage

If the machine is to be stored unused for a long 

time, disconnect it from the electrical outlet, make 

sure that parts that can be damaged by dirt are 

properly protected, and lubricate parts that can be 

damaged if they dry.

General safety instructions

These operating instructions must be considered 

as part of the tire balancing machine and must 

always be kept with it. If the machine is sold, the 

operating instructions must be handed over to the 

new owner. Always keep the operating instructions 

in a place that is easily accessible to the operator 

and ensure that they are kept in good condition.

Carefully read the operating instructions before 

starting the machine and always use it if there is 

any doubt about its operation.

The operating instructions contain important 

information concerning your safety. Follow the 

instructions carefully to avoid the risk of injury to 

people and to the equipment. In addition, there is 

useful information that will facilitate the use and 

maintenance of the machine.The manufacturer 

disclaims all liability for personal injury or property 

damage that occurs due to failure to follow the 

safety instructions, if any change or modification is 

made to the machine or if non-original spare parts 

are used. In addition, the warranty on the machine 

is canceled.

Children and persons with physical disabilities or 

mental ability may not use the product without 

supervision in accordance with EN 60335-1 / A2: 

2006.

Safety instructions

• 

Keep the work area clean, dry and well lit. 

Cluttered, damp and dark areas invite 

accidents and therefore injury.

• 

Keep children and spectators at a safe 

distance from the machine. Children should 

absolutely NOT use the machine or stay within 

the work area.

• 

Make sure that no dangerous situations arise 

when working with the machine, that the work 

area around the machine is free of objects that 

could possibly pose a danger, and that there is 

no oil (or other sticky material) on the floor that 

could pose a danger to the user.

• 

Immediately stop the machine in the event of 

uneven operation and contact a qualified 

service workshop.

• 

Only a qualified person with good education 

and knowledge of the machine’s function may 

use it.

• 

Wear a dust mask and goggles, as well as 

suitable work clothes, safety shoes and work 

gloves that are suitable for this type of work.

• 

Wear suitable clothing. Do not wear loose 

clothing and do not wear jewelry. Use hair 

nets if you have long hair. Be sure to keep hair, 

clothing and gloves away from moving parts. 

Loose clothing, jewelry and long hair can get 

caught in moving parts.

• 

Attention. Look at what you are working on and 

use common sense when using the machine. 

Do not use the machine if you are tired or under 

the influence of drugs, alcohol or medicines. A 

moment of not paying attention can be enough 

to seriously injure you.

• 

Attention. Look at what you are working on and 

use common sense when using the machine. 

Do not use the machine if you are tired or under 

the influence of drugs, alcohol or medicines. A 

moment of inattention can be enough to 

seriously injure you.

• 

Use the right product for the right work. Do not 

force the machine. Use the machine only for 

the type of work for which it is intended. The 

right machine makes work better and safer.

• 

Maintenance. Service and maintenance may 

only be performed by a qualified service 

workshop.

• 

Spare parts and accessories. Use only original 

spare parts and accessories when servicing 

and repairing the machine.

• 

Storage. When the machine is not in use, tools 

and equipment must be stored in a dry place to 

prevent rust. As soon as the machine is not to 

be used for a long time, disconnect it from the 

electrical outlet.

Specifications

Max. wheel weight ........................................... 65 kg
Power supply ..................... 230V / 50 Hz 200 watts
Balancing accuracy ........................................... ± 1 g
Rotation speed .......................................... 200 r.p.m
Position precision ............................................ 2, 81°
Rim diameter ...................... 10 ”-24” (256 - 610 mm)
Rim width ............................ 1.5 ”-20” (40 - 510 mm)
Driving time ....................................................... 8 sec
Noise level during work ................................. <70 dB
Working temperature range from ............. +5 - 50 °C
Humidity ........................................................... ≤ 85%
Size ........................................ 960 x 760 x 1160 mm
Net weight ....................................................... 105 kg